Allen + Roth 1138-2 Manual Del Usuario página 5

2. Fasten the body ring (C) to the table legs
(B) with the medium bolts (CC) and small
washers (DD).
Hardware Used
Medium bolt
CC
Small washer
DD
3. Place the slate table top (A) face down on
a non-abrasive surface and attach the
table leg assembly using the short bolts
(BB) and big washers (EE). When all bolts
are in place, tighten them fully. Cover the
long bolts (AA) and the medium bolts (CC)
with bolt caps (FF).
Hardware Used
Short bolt
BB
Big washer
EE
Bolt cap
FF
4. Place the glass top (E) with the smooth
surface facing upward on the slate table
top (A). Insert the lighting unit (F) under
the glass top (E) through the central hole
and fix with the lighting unit top ring (G).
Adjust feet to level the table.
2
x 8
x 8
3
x 4
x 4
x 12
4
5
C
CC
DD
B
A
A
G
E
G
A
C
D
B
BB
EE
F
B