xpr B100P-RS-EH Manual Del Usuario página 5

ADD FINGERPRINTS
Swipe the finger min.6 times until the LED turns green.
If the enrollment was successful you will get message for successful enrolment and the fingertip will turn green.
Go to Users (fig.1), select "New"(fig.2)
and then fill the form (Name, category,
card number...)(fig.3).
Save the user.
- Go to "Details".
- Select the finger to enroll by selecting the
fingertip.
- Select from which reader you will do the
enrollment. Enrollment can be done from any
instilled biometric reader.
- Click on "Enroll this finger"
Note:
You cannot enroll the same finger twice. If the
fingerprint is already enrolled, you will get message
"Fingerprint already exist!"
www.xprgroup.com
5