Technical Data; Safety Instructions - Kathrein UFOcompact plus UFG 810 Manual Del Usario

Technical data

Type of mounting
Number of hot-plug system
insert positions
Power supply
(UFN 800, 20610121)
Mains voltage
Power consumption max.
Secondary voltage/max.
permissible current
Signalisation
General
Extractor fan
Dimensions (H x W x D)
Permissible ambient tempera-
ture
Weight

Safety instructions

WARNING
During normal operation and increased ambient temperature, the surface
temperature may exceed 60 °C.
Should thermal cut-out occur, there may be danger due to hot metal parts!
When using UFOcompact plus
must be closed.
• The unit must be installed by qualifi ed personnel in compliance with the
local and national security standards and regulations.
• The equipment described is designed solely for installation in satellite
receiver systems.
• Any other use, or failure to comply with these instructions, will result in
voiding of warranty cover.
• The equipment may only be installed in dry areas indoors.
• Do not mount it on or against easily fl ammable materials.
• The equipment must be connected the equipotential bonding rail
(Cu, at least 4 mm
Installation in 19" cabinets or for wall mounting
Ten modules, one power supply unit (UFN 800
pre-assembled), two functional modules (UFX 800 pre-
assembled, and an additional one)
V/Hz
W
V/A
LED Green (normal operation), Red (undervoltage or excess
current), Red fl ashing (overvoltage)
mm
°C
kg
HOT SURFACE
in publicly accessible spaces, the front cover of the system
®
).
2
2 / 8
230 ± 10 %/50 ... 60
437
12.3/32.5
2
399 x 483 x 266
-20 ... +50
12.8
DO NOT TOUCH