Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Installation
1
Cutting the opening
Af x template (B) to the countertop at the desired
location with cellophane tape.
Using a pencil, mark the guidelines on the countertop
following the template (B).
Drill a clearance hole approximately
inside the perimeter line of the template (B).
Cut the opening following the perimeter line of the
template (B).
B
3
Installing the drain and plumbing
Install the drain (not provided) according to the
manufacturer's installation instructions.
CAUTION: Do not overtighten the drain assembly.
This may cause the bowl to forcefully crack during
installation or at some time in the future.
Install the waste system, faucet, and the water supply
(not provided) according to the manufacturer's
installation instructions.
1/4 in. to 1/2 in.
4
A
5
2
Positioning the sink
Check the cutout alignment by carefully positioning the
sink (A) in the desired mounting poisiton.
NOTE: It is recommended to practice the proper
placement two or three times before applying caulking.
Installing the sink
Turn the sink (A) upside-down and apply caulking around
the underside of the sink (A) rim near the edge, as shown.
Carefully lower the sink (A) in place, aligning it, and
press rmly.
Wipe off the excess caulking.
Please contact 1-855-434-5224 for further assistance.
A
A
HOMEDEPOT.COM
Publicidad
Tabla de contenido
