System Description; Technical Data - Dustcontrol RAF 1600 Manual Original

System Description

Radial fan
Dustcontrol's fans are so called radial fans. The air
is introduced into the fan at the centre of the fan
wheel and is forced to the fan housing and through
the outlet by the centrifugal force.

Technical data

Dimensions:
The capacity curves have been measured and
are stated empirically. Outlet pressure losses
from a normal outlet (silencer, back-fl ow valve/
bend) have been accounted for in the curve. Ad-
ditional equipment such as a diffuser can result in
increased pressure loss and must be taken into
consideration.
Stated air-fl ows are for standard air(101.3 kPa@
20o C).
The stated curves are for negative application,
all pressures stated are assumed to be below
relative atmospheric pressure at sea level. These
devices can also be used for positive pressure
application and will generate a greater pressure
differential.
Direct driven
The fans are direct driven.
Silencing
The fan is equipped with vibration isolators and
high quality sound insulation. External inline silen-
cing on the outlet can be installed as required.
PART NO Hz
400 V 50
230 V 50
460 V US/CAN 60
TECHNICAL DATA
Pump RPM rpm
Weight ca kg
Max dp kPa
Max Q m /h
3
Sound Level* dB(A)
Inlet/Outlet mm
* with exhaust silencer, 1 m.
Capacity and Power Consumption
kPa Pu
8
4
0
1000
10
20
kW P
Figure shows available capacity in an extraction system.
RAF 1600/2500 - 12
RAF 1600
112000 7,5 kW 112100
112002 7,5 kW 112102
112007 10 HP 112107
RAF 1600
50Hz 60Hz 50Hz
3000 3600 3000
290
7.7
2000
68
200/160
RAF 1600
2000 3000
RAF 1600
Part No 9053/9054-A
RAF 2500
15 kW
15 kW
20 HP
RAF 2500
60Hz
3600
330
9.3
3500
70
200/160
RAF 2500
Q
m 3 /h
RAF 2500