Use And Operation - Waldbeck 10032298 Manual Del Usario

USE AND OPERATION

Inflating Tires
1 . Loosen the attachment lock approximately 3 rotations counterclockwise
(See Fig 3). Do not remove lock completely.
2. IMPORTANI': Insert the air hose with threaded connector into the
attachment lock. Press in firmly while screwing clockwise until it can go no
further. (See Fig 4).
3. Tighten attachment lock clockwise until hand-tight.
4. Press the Power button below the LCD display to tum on. (See Fig 5).
Note: After 30 seconds of inactivity the digital tire gauge will tum off
automatically to conserve energy.
5. To choose desired pressure format (PSI, BAR, KPA), press the power
button continuously until desired format displays.
6. Screw the threaded connector onto tire's valve stem quickly. When
connected, the gauge will show current tire pressure.
7. Press „+" or "-" to set desired pressure level. Once set, wait a few seconds
and until current tire pressure displays.
Note: Always check and follow the manufacturer's recommended pressure,
usually located on the door jamb of your vehicle.
EN
13