Marineland MAXI-JET Guía De Instalación Rápida

Start Here - MAXI-JET
MAXI-JET
3
5
6
A
Option Utility Pump - Submerged & External Out-of-Water Use
O-Ring
(Preinstalled)
Impeller
Well
Magnet
1. Assemble Magnet and Impeller
Assembly into Impeller Well
Slide Strainer/Prefilter over intake
4.
Cup Mount onto the bottom of pump.
Suction Cup
in desired location
Mount
B
Option Laminar Flow - Submerged Under-Water Use
Omni-Directional
Mount
Suction Cup
Mount
Adapter
Plate
C
Option Power Head - Submerged Under-Water Use
Tube
Impeller
Well
Tube
Router
Suction Cup
Air
Mount
Control
Valve
Start Your Pump
1. ALWAYS
cups to stabilize the pump.
Questions or Missing Parts call Customer Service at (800) 322-1266 •
Quick Setup Option Guide
Multi-Use Water Pumps
™
(Setup Option A)
2
1
4
1) Impeller Assembly
2) Impeller Cover
3) O-Ring
(Preinstalled)
4) Strainer/Prefilter
5) Mount
6) Suction Cups
- S E T U P O P T I O N S -
Impeller Cover
Intake
Impeller
Assembly
Strainer/Prefilter
Impeller
2.
Attach Impeller Cover
3.
6.
continue onto Start Your Pump.
Magnet
O-Ring
(Preinstalled)
Propeller
Assembly
Propeller
Well
Assemble Magnet and Propeller
1.
Well Slide Propeller Cover over Propeller
3.
Mount onto the bottom of the pump
Omni-Directional Mount to attach the Suction Cup Mount
inside tank in desired location then
O-Ring
(Preinstalled)
Outtake
Impeller
Assembly
1.
Magnet Impeller
Assembly into Impeller Well
Slide Undergravel Adapter over Intake
4.
Adapter 6. Attach the Rotational Output over the Outtake
Rotational Output. Insert the Air Control Valve into the other end of Tube
Tube Router onto back of pump, attach Tube into Tube Router to secure it in place.
9. Slide the Suction Cup Mount onto the bottom of pump.
in desired location continue onto Start Your Pump.
(All Pump Models and Setup Options)
use suction
MAXI-JET PRO Laminar Flow (Setup Option B)
8
7
MAXI-JET PRO Power Head (Setup Option C)
11
12
11) Air Control Valve 12) Tube Router 13) Tube
14) Undergravel Adapter 15) Rotational Output
Water
Circulation
Insert Impeller
Setup
Slide Suction
5.
Place pump
Propeller
Propeller Cover
Insert Propeller Assembly into Propeller
2.
Slide the Omni-Directional
4.
Slide Adapter Plate onto the
5.
continue onto Start Your Pump.
Rotational Output
Impeller
Cover
Undergravel
Adapter
Intake
Strainer/Prefilter
Assemble Magnet and Impeller
2.
Attach Impeller Cover
3.
Slide Strainer/Prefilter onto Undergravel
5.
7. Attach the Tube onto the
10.
Single Suction Cup
Mount OPTIONAL
www.marineland.com
7) Single Suction Cup Mount
8) Omni-Directional Mount with Adapter Plate
9) Propeller Assembly 10) Propeller Cover
14
13
Sump System
Setup
6. Place pump
Insert Impeller
8. Attach
Place pump
Plug pump in.
2.
NOTE:
Drip Loop. (for safety)
NEVER
10
9
15
External
Setup
Laminar
Water
Circulation
Setup
Power Head
Water
Circulation
Setup
Make a
let the pump run dry.
09/10 AQ12332