Operating The Control Panel - DESKFIT DF300 Manual Del Usuario

10. OPERATING THE CONTROL PANEL

Memory /
Screen
lock (un-
Timer
lock)
Operation lnstruction:
Activate the System: Touch the screen. The "---" will appear on the display. Then, press and hold
the "M" button for 3 seconds.
The current height will display, and you can start operating the system.
Protective Standby Mode: lf there is no operation for 1 minute, the system will enter the protective
standby mode. To turn off the standby mode, press and hold the "M" button for 3 seconds. You can
also press and hold the "M" button for 3 seconds to activate the standby mode, when you don't
need to operate the system.
Height Adjustment:
Press and hold the up button to lilt the desk. Press and hold the down button to lower the desk.
Timer:
The timer is designed to inlorm users to stand up alter a sei period ol time. Press the "T" button to
set the period ol time. The display will flash "0.5 h" for 0.5 hour. Each press ol the "T" button leads
to a 0.5 hour increment. The maximal setting of time is 2 hours. When the display stops flashing,
then the period ol time is successlully sei. And the indicator light on the top right of panel will be on.
When the set time is up, the buzzer will beep to remind the users. The timer will turn off automati-
cally alter a long beep. To cancel the timing, press "T" button for 5 times until the display shows the
current height and the indicator light is off.
Upward
movement
Downward
Memory
movement
1/2/3
33
Indicator
light
Display