Svan SVRH2001A Manual De Instrucciones página 37

The voltage and frequency of mains power should be the
!
same as the values specified on the label behind your appli-
ance. If mains power is far below or above the specified values,
have the desired voltage by using a voltage regulator. You can get
help from a qualified electrician. The fuse of the mains socket should
be maximum 16A.
ATTENTION!
Ensure that the floor and walls of the location of your cooler shall not
be damaged by water against the risk of flooding of drainage water in
very humid environments.
On installations performed by the authorized service, customer shall
be informed and advised about the proper installation location, how-
ever final decision on the installation location shall be made by the
customer.
Authorized Service specify the process mentioned above on the rel-
evant installation service form. Customer shall be solely responsible for
any damages that may occur due to the installation location decided
as per the final decision of the customer.
37