Tabla de contenido
Publicidad
Translation of the original operating instructions (short version)
1.9.
Intended use of CPG 1000 INV
The generator is intended for operating conventional electrical consumers such as
chains of lights, electric service tools (drilling machines, electrical chain saws, com-
pressors laptops, mobile phones, etc.. Ensure that the generator is earthed (see
chapter 5.6).).
In case of a doubt, contact the manufacturer of your device.
A qualified electrician must be consulted in advance for connecting the genera-
tor to stationary equipment such as heaters, household supply, air condition-
ers or for power supply to caravans. Connection for feeding electrical power in-
to existing networks shall only be implemented by specialist personnel and af-
ter prior approval by the energy supply company. The critical point of an induc-
tive consumer is the power consumption during switch-on. The power con-
sumption can be up to 3 times the rated power. This must be taken into con-
sideration at all times.
No liability is assumed for damages caused due to non-compliance with these in-
structions. You are required to read the operating instructions before using the device
for the first time. In case of doubts regarding the connection and operation of the de-
vice, contact T.I.P. Technische Industrie Produkte GmbH. Please note that our de-
vices have not been intentionally designed for commercial, handicraft-related or in-
dustrial use. We do not assume any warranty if the device is used in commercial,
handicraft or industrial companies as well as for corresponding activities.
1.10. Risks and scope of prevention
Risk
Direct electrical con-
tact
Burns
Hearing impairments
Contact, inhalation
Fire or explosion
Environmental haz-
ards
Breakage during oper-
ation
Description
Direct electrical contact with wet
hands can cause electrical
shocks.
Touching the exhaust can cause
burns.
Prolonged stay near a running
generator can cause hearing
impairments.
Inhaling exhaust fumes can be
fatal!
The fuel of the device can catch
fire.
Leaking of oil and fuel damages
the environment.
If the device is operated on a
sloping surface, lubrication is not
ensured and the device can be
damaged.
Prevention
Avoid contacting the device with
wet hands and make sure the de-
vice has appropriate grounding.
Let the devices cool down after op-
eration.
Always wear ear protection.
Never operate the device in closed
rooms.
Never operate in inflammable envi-
ronment. Never refuel when engine
is running. No smoking.
Avoid leakage of these substances
and use collecting trays during
maintenance.
Always operate on a flat surface.
4
21
Publicidad
Tabla de contenido
