CMC TRISKELION Manual Del Usario página 10

Tabla de contenido

Publicidad

INSTRUCTIONS FOR USE
Attaching the Triskelion-Salalift II
Winch Adapter
The Triskelion-Salalift II Winch Adapter is an optional
accessory and is designed to enable the 3M DBI/SALA
Salalift II Winch to be mounted to and used with the
Triskelion (refer to page 15).
To attach the winch and winch adapter:
1.
Attach the adaptor to the lower Triskelion leg using the
top two holes nearest the upper leg (Figure 13).
Ensure a leg with a pulley is selected. These legs
are marked with a Pulley over Leg symbol
on the red leg labels.
2.
Remove the two red pins from the adapter and
position it on the leg, aligning the pin holes in the
adapter with corresponding holes in the Triskelion leg.
Re-insert the red pins to secure the adapter in place
(Figure 14).
3.
Winch over the adapter bracket ensuring cutout
adapter (Figure 15).
4.
Re-insert the lock pin to secure the winch to the
adapter (Figure 16).
A
in
B
on the
10
USER MANUAL
TRISKELION
Figure 13
Figure 14
Figure 15
Figure 16

Publicidad

Tabla de contenido
loading

Tabla de contenido