ZEN AROME MobySens Manual De Instrucciones página 4

• If the power supply cord is damaged, it must be replaced by a special or similar cord
available from your supplier or his after sales service department.
• Check that the voltage of your electricity supply corresponds to that of the device.
• Only use with the adapter supplied.
• Indoor use only. Use in an environment ranging between 10°C and 30°C.
• Store the device in a clean, dry place, out of the reach of children, having cleaned and
dried it.
This device is not designed to be used by people, including children, whose physical, sensory or
mental capacities are not fully developed, or people who lack the experience or knowledge to use it
properly unless they are monitored by someone who is responsible for their safety or they are able
to follow prior instructions concerning the use of the device.
Children should be watched to ensure they do not play with the device.
Size of product: 7,2 x 4,2 x 12,8 cm
Input : AC100-240V 50/60Hz Output : DC5V 1A
II. INSTRUCTIONS
Step 1: Assemble the nebulizing spray head together with essential oil bottle.
Step 2: Mount upright the assembled essential oil bottle onto the main unit (at all time,
please avoid tilting the bottle to prevent oil leakage)
Step 3: Press the POWER button to start the diffusion continuously.
Press the "POWER" button twice to obtain a circular intermittent mode: diffusion on for 10
seconds and 20 seconds OFF.
Press the "POWER" button a third time to turn off the diffuser.
IMPORTANT TO KNOW: without link power, indicator light will be blue and continue light
if electricity sufficiently. In low battery, the power indicator light will be red and
continuously flashing, needs charge as soon as possible.
Indicator light is red during battery charging, light turns into bleu when fully charged.
CAUTION: Do not tilt the device when in use. Do not remove the diffusion head when the
unit is running. Do not lay the diffuser when the bottle of essential oil is placed in the
diffusion head.
Net weight : 300g
/Autonomy work time: 20h – Charge time 6h
Material: PP+PBT
4