Starlyf 5821214 Manual De Instrucciones página 10

the accessory adapter.
IMPORTANT: There is only one way to insert the acces-
sories as far as they can go and turn them clockwise so
they are firmly attached.
CLEANING AND MAINTENANCE
MAKE SURE THE DEVICE IS UNPLUGGED FROM
THE MAINS BEFORE CLEANING
Empty the water tank and clean it after each use.
Use detergent to clean accessories when they are dirty
(nozzle and round brushes). Then rinse them with clean
water and let them air dry.
Descaling the Inside of the Water Tank
To eliminate limescale that builds up inside the water tank,
fill it with water and add one or two tablespoons of white
vinegar. Close the water tank cover and shake the tank to
mix the contents. DO NOT SWITCH ON THE DEVICE.
Eliminating Limescale Build-up in the Device
If steam starts coming out of the mop much slower than
usual or stops coming out entirely, you may have to elimi-
nate limescale build-ups. Over time, limescale can build
up on metal parts and noticeably reduce mop performan-
ce.
Limescale build-up must be eliminated on a regular basis,
after every 25 to 50 uses with a full water tank, or at least
once a month, especially in geographic areas where the
water has a high calcium content.
The required frequency for eliminating limescale build-up
will depend on the quality of the drinking water at your ad-
dress and how often you use the steam cleaner.
Eliminating Limescale Build-up with a Cleaning Solu-
tion
1. Prepare a solution made of 1/3 white vinegar and 2/3
drinking water and pour it into the water tank.
2. Ensure that the unit is in a position in which the steam is
not pointed at the floor or nearby objects or surfaces. Plug
the device into the mains, press the ON/OFF button and
let all the water and vinegar come out of the device in the
form of steam.
3. Repeat this process as many times as necessary until
the flow of steam is normal again.
4. Fill the tank with clean water and rinse it.
5. Fill the tank with clean water again, fit the tank back on
the unit and switch on the device to convert the water into
steam (until the tank is empty).
WARNING!:
Do not leave the device unsupervised during the pro-
cess of eliminating limescale build-up or during use.
IMPORTANT:
Perform a test cleaning on a small isolated area after each
process of eliminating limescale build-up to ensure there is
no limescale residue in the device.
Cleaning Accessories when Steam Power is Reduced
In some geographic areas, the concentration of minerals in
the water can be very high and can affect the accessories
that allow the device to be used as a hand-held steam clea-
ner, given the low steam power.
This may be due to scale build-up inside the nozzle tip.
Eliminating Limescale Build-up
We recommend you use a lubricant spray. Spray a mode-
rate amount once or twice to ensure the lubricant enters the
nozzle tip. Then fill the water tank as indicated. Switch ON
the device so the steam flows out of the accessory for seve-
ral minutes and eliminates the blockage. Once the blocka-
ge has been removed from the nozzle, place the device so
that the steam comes out onto a cloth or a surface where it
can drip without leaving a mark.
This product contains no serviceable parts. Do not attempt
to repair it yourself. You can detach the accessories to
clean the mop, but you cannot tamper with the device to
make a repair.
ALL REPAIRS must be performed only by an authori-
zed professional.
WASHING THE MICROFIBRE CLOTH
• The microfibre cloth can be machine washed on a cold
water programme. Always use mild detergent.
• For optimal results, dry flat.
• IMPORTANT: Let the device cool down completely before
performing any maintenance or troubleshooting operations.
• IMPORTANT: Never wash the microfibre cloth with bleach
or fabric softener.
STORAGE
• When you have finished using the steam cleaner, switch it
OFF and unplug the power cable.
• Remove the water tank from the unit and empty it. Then
clean the outside surface with a dry cloth. Do not clean any
part of the device until it has cooled down.
• Remove the microfibre cloth and wash it so it is ready for
the next use.
• Keep the product in a safe, dry place. Keep the measuring
cup and funnel for future use.
• Keep out of reach of children.
TROUBLESHOOTING
USE THESE INDICATIONS AS THE FIRST STEP
TOWARDS SOLVING ANY PROBLEMS.
ALL REPAIRS must be performed only by an authori-
zed professional.
WARNING!: TO REDUCE THE RISK OF INJURY, UN-
PLUG THE DEVICE AND LET IT COOL DOWN BEFORE
PERFORMING ANY REPAIR WORK.