Switching On The Product; Declaration Of Conformity - nedis ACAM04BK Guia De Inicio Rapido

•
When possible, remove the battery from the product when not in use.
•
Properly dispose of the empty battery.
•
Seek medical advice immediately if a cell or a battery has been swallowed.
Insert or change memory card (image B)
A microSD card (not included) is required to take pictures or videos. Insert the
microSD card into the microSD card slot A
4
Use a microSD card with a maximum of 32 GB storage capacity.
4
Format the microSD card before use.
Charging the product (image C)
The product is delivered with a partially charged battery. For optimal battery life,
fully charge the battery before first use.
Charge the camera from any USB outlet with the supplied micro USB cable. The
camera can be charged while recording video. Fully charging the battery takes
about 3 hours.
4
When battery level is low, a low battery notification is shown on the screen
and the camera turns off.

Switching on the product

Hold the power button A
q
A
lights up blue. A welcome screen appears, and the camera enters video
mode.
Switching between modes
Switch between modes by pressing the power button A
Record pictures and video images
In video mode, press OK to start or stop recording video.
In picture mode, press OK to take a picture.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product ACAM04BK from our
brand Nedis , produced in China, has been tested according to all relevant CE
®
standards and regulations and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU regulation.
t
3
for about 3 seconds until the status indicator LED
8
.
3
.