Cooking Timer; Switch Between Timer Mode And Weighing Mode - SmartLab kitchen W Manual De Usuario

Cooking Timer

1. With the batteries correctly installed, press the Timer button when the device
is off, it will enter the timer mode and display 00:00. The Timer icon will
appear on the LCD.
Note:Ifitisnotthefirsttimetosetthetimer,itwillstartwiththevalueyouset
last time. You can press and hold the Timer button for about 2s to reset the value
to zero.
2. Whenthenumberisflashing,presstheUnitbuttontosetyourdesiredminute
andsecondofthetimerthenpresstheTimerbuttontoconfirm.Aftersetting
the last number, press the Timer button to start the timer.
3. When the time has run out, the scale will give a "beep beep" signal for 1 mi-
nute. Press any button to stop the beeping.
Note: If there is not any operation before timer starts, the backlight will be off in
about 20s and the scale will turn off automatically after about another 5 minutes.
Or you can press and hold the ON/OFF button for about 3s to turn off it.

Switch between timer mode and weighing mode

1. When the scale is in weighing mode, press the Timer button to switch to timer
mode and the weighing function will be closed.
2. When the scale is in timer mode, press the ON/OFF button to switch to weig-
hing mode.
21