Descargar Imprimir esta página

Using The Appliance - Telstar TFA004210MD Manual De Instrucciones

Freidora de aire

Publicidad

Idiomas disponibles

Idiomas disponibles

AIR FRYER
TFA004210MD
Before first use
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Thoroughly clean the basket and pan with hot water, some washing-up liquid and a non-abrasive sponge.
Note: You can also clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth.
This is an air fryer that works on hot air. Do not fill the pan with oil or frying fat.
Preparing for use
1. Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2. Place the basket in the pan properly
3. Put the pan into the machine.
Note: the pan MUST be put into the appliance properly, otherwise the appliance doesn't work!
4. Pull the mains cord and plug into the earthed wall socket.
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance.
Do not put anything on the air-inlet on the two sides of the appliance, this disrupts the airflow and affects the
hot air frying result.

USING THE APPLIANCE

The air fryer can prepare a large range of ingredients. Pls refer to the section "settings" table hereinafter
Hot air frying
1. Put the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the air fryer.
3. Put the ingredients in the basket.
Note: Never fill the basket in full or exceed the recommended amount (see section 'Settings' in this chapter),
as this could affect the quality of the end result.
16

Publicidad

loading