MS MyCarol Instrucciones página 19

A. STERILIZE
1. Before placing the bottles and accessories (teats, caps
etc.) into the steriliser, they must be washed cleanly and
thoroughly rinsed in fresh water and emptied.
2. Remove the Bottle Container from the Base unit and place
bottles inside UPSIDE DOWN. This is important so that
steam can enter the bottles freely.
3. Place the accessories into the Accessory Grid and cover
with the Lid. Fill the Measuring Cup to the top of marked
line with 90ml of fresh water and pour into the Base Hea-
ting Element.
• DO NOT EXCEED OR REDUCE THE VANUME OF WATER.
• DO NOT PUT THE ACCESSSORY GRID UPSIDE DOWN.
DO NOT.
TAKE THE COOKING GRID OUT OF THE CONTAI-
NER.
4. Assemble the unit parts and place on the Base Heating
Element.
5. Plugging the unit into 110-230 V AC socket, it will auto-
matically be in the state of standby, with the LCD screen
displaying '00' .
6. Press 'Function' ONCE, it will automatically sterilize after
INSTRUCTIONS FOR USE