Aqua Medic Formosa 50 Manual Del Usuario página 12

1. Tube 12/16 pressure side
2. Tube 12/16 filter inlet
3. Pump 24 V AC
4. Pump's connecting piece
5. Fixing screws for pump holder
6. Pump holder
7. Pump connection suction side
8. Lid of pot filter
9. Grooves of the lid
Suitable filter material can be placed between the fleece (Fig. 5, No. 12) and the sponge (Fig. 5, No.
13) depending on the desired filter type (chemical, mechanical, biological). The filter has to be
cleaned, if necessary, as soon as the flow decreases at the latest.
Coarse waste is converted in dissolved anorganic compounds (e. g. nitrate, phosphate, etc.) in the
filter of the bacteria settled there. In order to avoid this, the coarse filters (Fig. 5, No. 12 and 13)
should be cleaned regularly. Biological filter are rinsed with warm water if they have to be cleaned
to avoid damaging the adherent bacteria.
5. Illumination
LED illumination ECOplant (optional, see separate manual)
The ECOplant (not included in shipment) is screwed with two screws and the supplied holder centrally
on the separating wall of the filter chamber.
6. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase AB
Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of charge –
always provided the product has been installed correctly, is used for the purpose that was intended
by us, is used in accordance with the operating instructions and is returned to us carriage paid. The
warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or damage
is caused by accident, misuse or neglect. We regret we are unable to accept any liability for any
consequential loss.
Please note that the product is not defective under the terms of this warranty where the product, or
any of its component parts, was not originally designed and / or manufactured for the market in
which it is used. These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions. If
you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
12
10. Lid's sealing
11. Upper spacer
12. Filter fleece
13. Filter sponge
14. Pad for filter sponge
15. Filter pot
16. Clamps
17. Filter inlet
18. Tube with tube clamps
- Technical changes reserved – 11/2015