Troubleshooting - Healthy Living BD-3000S El Manual Del Propietario

Troubleshooting

Error/Symbol What Does It Mean?
Monitor may have been
inflated without the cuff
around the arm OR Cuff
may not be positioned
correctly on the arm.
The cuff tube may be folded
OR You may have moved
while the cuff was inflating.
You may have moved or
spoken during the mea-
surement process.
You may have been
startled by a noise or
vibration while measuring.
22
Troubleshooting
All manuals and user guides at all-guides.com
How To Fix It
Read page 17 (Applying
the Cuff).
Read pages 15 & 16
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
Troubleshooting
Error/Symbol What Does It Mean?
You have been ignoring
the flashing replace
battery symbol (
The batteries have
run down.
Blood pressure Cuff may not be
value seems too aligned correctly
high or too low
Blood pressure Circuitry locked.
value seems too
high or too low
Unable to take a
The cuff may not be
measurement after
positioned correctly.
receiving an error
symbol.
How To Fix It
Replace with four new
"AA" batteries. Make
).
sure the polarities are
positioned correctly in
the battery compart-
ment before continuing
to measure your blood
pressure.
Replace with 4 AA bat-
teries quickly so you
may continue to mea-
sure your blood pres-
sure without any inter-
ruptions.
Read page 17
(Applying the Cuff).
Remove then reinsert
the batteries and then
proceed to take mea-
surement again.
Read page 17
(Applying the Cuff).
23
Troubleshooting