REPA MILLENNIUM V8 BASIC PLUS AS Manual De Instrucciones página 16

2.2.5 VALVE PROGRAMMING (MODEL VOLUME)
warning
NOTE
The valve is protected by a key lock indicated by the continuous ignition of the icon depicting a key
N.B. It will be possible to modify each value set in the valve, bearing in mind that if no changes are made within 60 seconds, the valve
will again enter a key lock with the appearance of the icon depicting the key
1) TIME SETTING
Press and hold the buttons at the same time
Press the button and the symbol for the wrench will light up on the display
Press the button again and the first 2 digits of the display representing the hours of the day 12 - 00 will start flashing.
Use the buttons
Again press the button
Use buttons
Confirm with the button
2) PROGRAMMING THE REGENERATION TIME
Press and hold the buttons
Press the button and the symbol for the wrench will light up on the display
Press the button .
Press again the button
16
to set the exact hours.
and the second 2 digits of the display representing the minutes of the day 12 - 00 will start flashing.
to set the exact minutes.
and wait 60 seconds until the key lock sounds with a beep.
at the same time for 5 seconds until you hear the sound of a beep and the item is unlocked.
and the first 2 digits of the display representing the regeneration hours 02 - 00 will start flashing.
.
for 5 seconds until you hear the sound and the unlocked key appears.
.
.
.