EuroSteam EVOLUTION 6399 Manual De Instrucciones página 7

*Cleaning the boiler is important to the performance of the iron*
We recommend that the following cleaning instructions be carried out every 2-3
months or if you notice any water drops leaking out of the soleplate of the Eurosteam.
6. Cleaning
Soleplate
Before cleaning the iron be sure that the unit is disconnected from the power supply and that
the iron is completely cooled down. Do not use abrasives on the soleplate. Deposits and
other residues on the soleplate can be removed with a cloth soaked in a vinegar and water
solution. Keep the soleplate smooth by avoiding contact with hard or abrasive surfaces.
Boiler Tank
Using your measuring cup fi ll to slightly below max line with 1/2 vinegar and 1/2 water. Be
sure that tank is completely empty and fi ll with vinegar and water solution. Place safety cap
on tightly, be sure that steam dial is in off position (turn counter clockwise) and plug into
a power surge protection bar. Turn on and let unit heat up until orange ready light goes off.
Turn off and unplug from power source, let sit for 10 minutes and then shake vigorously.
Let cool for another 10 minutes, depress and hold down the steam button until no more
steam comes out. Unscrew safety cap and empty tank contents. This may need to be done
several times depending on how long since the last cleaning and the type of water used. To
complete, rinse tank with clear water until vinegar odour dissipates.
TIP
*For best ironing results use a mesh-type ironing board to allow
excess steam to escape.
®
*Always rest your Eurosteam iron horizontal on the Tefl on pad
and never on its heel.
*Do not let soleplate contact anything that could scratch or damage the soleplate,
such as zippers or metal studs.
7
CLEANING YOUR EUROSTEAM ®