Setting The Time And Date - Roche ACCU-CHECK Guide Me Instrucciones De Uso

Your New System
1

Setting the Time and Date

1
Press and release
the meter on.
The flashing test strip symbol
appears on the display.
4
Repeat steps 2 and 3 to set
minutes, am or pm, month, day,
and year. Press and hold
until the flashing test strip
symbol appears. Insert a test
strip to perform a test.
12
2
to turn Press and hold
appears on the display. The
hour flashes.
Press
increase the hour.
NOTE
• The meter prompts you to set the time and date the first time you
turn the meter on or if an error occurs.
• Press and hold
appears to perform a test.
• The time and date on the meter synchronizes to the time and
date on the paired device each time the meter sends data to the
paired device.
set-up
until set-up
or to decrease or
at any time until the flashing test strip symbol
3
set-up
Press to set the hour and
move to the next field.