Caliber HBB 460BT Manual página 5

Playing from USB-stick
• Turn the speaker ON.
• Insert a USB stick into the slot (10), the stored music will be played automatically.
• While playing, press [7] or [8] (5/7) to select the previous or next song.
Note: Under Bluetooth or AUX-in mode, if a USB is inserted it will automatically start playing.
To return to the previous mode, use the [MODE] button.
AUX-IN:
You can connect an external device e.g. MP3 player to the AUX-in (11) of the HBB460BT using a
jack-to-jack cable (included).
• When an external device is connected, The unit will switch to Aux-in mode automatically.
• Start playing music on your external device.
Note: The playback control buttons on the HBB460BT will not work in this mode.
TWS
• Turn on the two identical speakers you want to pair, please note they must have the same BT paring
name.
• Long press "12" on one of the HBB460BT's for 5 seconds until "BU" shows on the display.
• Then connect the BT paring name of the two machines (only one BT name will appear in the devices
list on your phone).
• Then make Bluetooth connection with your phone to play music by the two paired Speakers to
create a more powerful surround sound effect.
• When you want to exit the TWS mode, long press "12" button (of the unit you set at beginning) again
for 5 seconds to exit the TWS mode.
Remark: Under the TWS mode, if you connected your mobile phone to the unit (you set at beginning)
via the provided audio cable, it will start to play AUX via TWS function, under this status, you can not
switch to Bluetooth mode by pressing the Mode button.
A A
TWS
Combine two HBB460BT's for a
louder and wider stereo sound
B B