Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
7
5
6
4
2
-3
1
11 8
12
10
13
FIG.
13
USING THE AIR CONDITIONER
To reduce the risk of fire, electric
shock, or injury to persons, read the important
SAFETY instructions section before operating this
appliance
To begin operating the air conditioner
after
installation,
follow these steps:
t. Plug in the air coeditioner.(To
prevent electrical
hazards, do not use an extension cord or an
adapter plug.)
2. Set the TEMP Control to the coolest setting.
3. Set the MODE control at the highest COOL level.
4. Adjust the louvers for comfortable air flow.
5. Once the room has cooled, adjust the TEMP and
Mode Control to the setting you find most
comfortable.
NOTE : If the air conditioner is turned off, wait 3
minutes before restarting. This allows pressure
inside the compressor to equalize. Failure to wait 3
minutes before restarting may cause inefficient
operation.
If you move the TEMP Control to a warmer, then
immediately back to a cooler setting, the unit will
shut off. Wait 3 minutes before restarting.
1. Cabinet
2. Vertical Louver
3. Horizontal Louver
4. Front Grille
5. Inlet Grille
6. Air Filter
7. Control Board
8. Power Cord
9. Evaporator
10. Condenser
11. Compressor
12. Base pan
13. Remote Control
-10-
Publicidad
Tabla de contenido
