DISPLAY
r POWER
To turn the air conditioner O N, pushthisbutton.To
turnthe air conditionerOFF, pushthe buttonagain.
• This buttontakespriorityover any other buttons.
• When youfirstturnit on, the unit isin cool mode,
Highfan speed,Temperaturesettingat 72°F.
REMOTE CONTROL SIGNAL
MODE
- Every timeyou pushthisbutton,it willshiftamong
COOL, ENERGY SAVER and FAN.
- ENERGY SAVER
• The fan stopswhenthe compressor stopscooling.
Approximately every 3 minutesthe fan will turnon and
the unitwill checkthe room air to determineif coolingis
needed.
FAN SPEED
• Every timeyoupush thisbutton, itadvances t he
setting asfollows :{HIGH(F3) _- LOW(F1) - ,
MED(F2) - -,HIGH(F3)}
TEMPERATURE
SETTING
• Use thisbuttonto automatically controlthe
temperatureof the room. Thetemperaturecan be
set withina rangeof 60°F to 86°F by increments of
I°F.
a.or an 1
, the unit will begin
to run at its last setting.
AIR DIRECTION
ADJUSTMENT
HORIZONTAL
AIR DIRECTION
CONTROL
The horizontal air direction is adjusted by moving
the vertical louvers right and left with your
fingertips. (FIG. 14)
TIMER
- SHUT-OFF TiME
• You will usually use shut-off time while you sleep.
• With unit running, use Timer to set number of hours until
shut-off.
• For your sleeping comfort, once Time is set, the
Temperature setting will raise 2°F after 30 min., and
2°F after another 30 min.
• Every time you push Timer button, it advances the Timer
setting as follows: 1 Hour _ 2 Hours -* etc. --_12 Hours
maximum.
START TIME
• With unit not running, use Timer to set number of hours
before unit starts.
• Every time you push Timer button, it advances the Timer
setting as follows: 1 Hour -_ 2 Hours --, etc. --, 12 Hours
maximum.
VERTICAL AIR DIRECTION CONTROL
The vertical air direction is adjusted by moving the
horizontal louvers up and down with your fingertips.
(FIG. 15)
FIG.
14
FIG.
15
-11 -