Technical Specifications - Menabo PADDY Instrucciones

Product Description
PADDY is a universal smart pad for any brand and
model of car baby seat, conceived to monitor the
presence of a child in the car seat.
PADDY is a device that alerts via APP if the child has
been abandoned in the vehicle. The APP warns by
means of an acoustic signal, by flashing the LED of the
photo camera and by vibrating the phone. This alarm
remains active until the child is removed from the seat.
If this alarm is not deactivated within 30 seconds,
the system sends a message indicating the GPS
geographical coordinates of the place where the alarm
was generated to other two predefined telephone
numbers, such as: parents, grandparents or friends.
Box content:
• 1x PADDY Smart Pad
• 1x Owner's Manual
Fig.1 Fig.1
Product registration
Download the PADDY Smart Pad APP available in
the Android and IOS stores. The APP may also be
downloaded by scanning the QR code here beside.
4

TECHNICAL SPECIFICATIONS

• Compatible with Android OS 6.0 or higher
• Compatible with IOS 10.0 or higher
• Communication: Bluetooth LOW ENERGY
• Transmitting power: 2.51 MW
• Long-lasting interchangeable battery: 3v CR2450
• Operating temperature range: from -20°C to +
70°C [ from -4°F to 158°F ]
Setting-up the APP
Remove the Smart PADDY pad from the box
and place it on the base of the car child seat.
Insert the seat belt buckle through the slot of
the PADDY cushion. Make sure that the PADDY
logo is facing upwards, as in figure 1.
QR