The unit cannot read my USB device.
1. If your USB device needs power, you may need to switch on before connecting
it to the boombox.
2. This unit does not support a direct USB connection with a computer. You need
to use a USB flash memory device, or an MP3 player.
3. If you are connecting a USB external hard disk: you may need to connect it to
both an external power source and the boombox. If you are using a self-powered
PMP, make sure that the battery is sufficiently charged.
4. Check that your USB device is formatted in the FAT or FAT 32 file system
format. USB device formatted as NTFS are not compatible with this unit. Caution:
if you attempt to modify your file system, formatting your device will erase all
data. Please refer to your USB device's instruction manual first.
MP3 PLAYBACK OPERATION
9.
PLAY / PAUSE: Press the PLAY / PAUSE button [13] once to play an MP3.
Press it again to pause playback.
10. Find your favorite track to play by pressing the /+ [6] or /– [7] buttons
to skip forward or backward.
11. The LCD display [5] will show the selected track number.
12. To repeat playback of a particular track, press MODE [8] once.
13. To repeat the whole tracks file, press MODE [8] again.
14. To repeat the entire CD playback, press MODE [8] again.
15. To play tracks in random order, press MODE [8] again.
16. To stop playback, press the STOP button [12].
This boombox features an AUX line-in jack for connecting your iPod, MP3 player
or other digital music player.
6.
Connect the headphone jack of your external device to the AUX IN jack [15]
located on the back cabinet of the boombox. (The connection cable is not
included).
7.
Press the FUNC button [9] to place the unit in "AUX" mode.
8.
Start to play your iPod, MP3 player or other external audio device.
9.
Slowly adjust both volume controls on your boombox and the external
device.
10. Turn off your iPod, MP3 player and etc. when you are finished listening. Turn
the boombox off and unplug the device from the AUX IN jack [15].
User's Manual
AUX IN FUNCTION
26
E N