ESYLUX 3983099 Manual De Instrucciones página 23

Explanation
Radio module alarm triggered when input is set.
Silenced when the alarm is triggered.
Radio module's fault signal indicating a flat
battery.
Fault signal received from a networked radio
module/PROTECTOR KRF 9 V device that has a
flat battery.
Ready for operation/standard mode/radio
module is operating correctly.
Explanation
The radio module is in programming mode. The
button has been pressed and held down for
approx. 2-3 seconds.
Programming has been successfully completed.
The radio module reverts to the factory settings.
The button has been pressed and held down for a
minimum of approx. 5 seconds.
Solution
Silence the alarm signal for approx. 10 - 13 minutes.
Any networked radio modules/PROTECTOR KRF 9 V
devices will also be muted.
Silence the alarm signal for approx. 10 - 13 minutes.
Any networked radio modules/PROTECTOR KRF 9 V
devices will also be muted.
Wait at least 20 minutes before replacing the
battery so as to avoid disrupting the radio
transmission.
Wait at least 20 minutes before replacing the
battery of the device which initiated the signal
so as to avoid disrupting the radio transmission.
If the signal persists, all of the radio group's
radio modules/PROTECTOR KRF 9 V devices
will need to be reset to their factory settings and
reprogrammed.
Solution
The radio module will automatically revert to
standard mode after approx. 1 minute.
Press and hold down the button for a minimum of
approx. 5 seconds to restore factory settings.
Once the button is released, the radio module
reverts to standard mode without radio
communication.
GB
23