Attaching The Custom-Door-Panel Brackets - Dacor DRW24980RAP Instrucciones De Instalación

Installation Instructions

16. Attaching the Custom-Door-Panel Brackets

Attach the panel brackets to the top and bottom of the panel.
Custom Panel: STS
Drive 10 screws each to the top and bottom brackets as shown in the graphic. (The other
holes on each side of the bracket are for a different application.)
Custom Panel: Wood, Other
• The template informs you the position of the bracket and holes.
• Mark hole positions on every corner of the panel according to the template and drive
the screws into the holes.
Panel
UP
LOW
48 English
Dacor_BRW9000R_IM_DA68-03621J-02_EN.indd 48
Screw Hole
(FH) M4x14 20 ea
UPP : 10 ea / LOW : 10 ea
Template
(FH) M4x14 20 ea
UPP : 10 ea / LOW : 10 ea
2020-10-19 10:53:10