Philips HP4940 Manual Del Usuario página 10

EnglisH
10
Problem
The
appliance
does not
work at all.
Cause
Perhaps the socket
to which the
appliance has been
connected is not
live.
The appliance may
have overheated
and switched itself
off.
The appliance may
not be suitable for
the voltage to
which it has been
connected.
The mains cord of
the appliance may
be damaged.
The appliance may
not be suitable for
the voltage to
which it has been
connected
Solution
Make sure the socket is live.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the grilles
to make sure they are not
blocked by fluff, hair, etc.
Make sure that the voltage
indicated on the type plate of the
appliance corresponds to the
local mains voltage.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by
Philips or similarly qualified
persons in order to avoid a
hazard.
Make sure that the voltage
indicated on the appliance
corresponds to the local mains
voltage.If necessary adjust the
position of the dual voltage switch
with a screwdriver or coin.