Puma Half Time Manual De Instrucciones página 3

ENGLISH
PUMA Half Time User Manual
The watch features selective alternation of time-date display. This
watch also has 5 functions: month, date, hour, minute and second.
EL back light and logo LED will light up at same time for 3 seconds
after pressing S1.
Logo LED
Mode
General Operations
Time mode:
In Time mode, press S3 to display Date, when pusher released
display will return to time mode after 2s.
In Time mode, press S3 two times to display Second. Press S2 to
reset Second to "00". Press S3 to return to time mode.
Time Mode Display Date
S3
Hour Month
Minute
2S Auto return
4
Light
Set
Display Second
S3
Date
Time and Date Alternate mode:
In Time mode, press S2 to toggle the time/date alternating display.
Time and date will alternate every 2s. Press S3 to display the Time
Second. Press S2 to reset Second to "00". Press S3 to go back to
normal Time Mode.
Time Setting:
In Time mode, press S2 two times to enter Time Setting mode. Press
S2 to set the next setting item to adjust and press S3 to increase
the digit.
The sequence of Time setting is Month — Date — Hour — Minute
— Exit to Time Mode.
If Minute digit is adjusted, press S2 to show new set time and then
press S3 to start Second and return to Time Mode.
Water Resistance:
This watch is water resistant up to 5 ATM.
Battery Replacement:
If the Display dims or the EL light is dim, the user is recommended to
go to the authorized service center for correct battery replacement
(cr2025).
5