Symbols - RIDGID R829 Manual Del Operador

SyMbOLS

Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the worklight better and safer.
SyMbOL
V Volts
A Amperes
min Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Tool
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Safety Alert
Hot Surfaces
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMbOL SIGNAL
dANGER:
WARNING:
CAUTION:
CAUTION:
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand
completely the Operator's Manual. If you do not understand the warnings and instructions in the Operator's
Manual, do not use this product. Call Customer Service for assistance.
NAME
Voltage
Current
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Precautions that involve your safety.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SAVE THESE INSTRUCTIONS
dESIGNATION/EXpLANATION
5