Orbis T-11 Instrucciones De Empleo página 2

AUTOMATIC SWITCH FOR STAIRCASE LIGHT
OPERATING INSTRUCTIONS
COVER
PENDULUM
MANUAL CONTROL
The device must be vertically fixed in order to obtain the correct functioning.
DO NOT TAKE OFF THE COVER, THE DEVICE COULD BE SERIOUSLY
DAMAGED.
Connections must be in accordance with the circuit diagram.
1 2
~
REGULATING
Take off the pendulum cover and move the weight to the correct position depending
on the time light requirements. The device is adjusted to give 3 minutes of continual
light.
THE WEIGHT IS HANDLE OPERATED. CARE MUST BE TAKEN TO ENSURE
THAT THE PENDULUM IS LEVEL.
MANUAL CONTROL
Move the manual control to the following position, in order to obtain:
Maximun load of gas discharge lamps: 50 mA.
DIMENSIONS:
77
63
ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61
Teléfono:+ 34 91 5672277;
PENDULUM COVER
3
Permanent light
Timer light
Total disconnection
42.5
26
E–28020 MADRID
Fax:+34 91 5714006
E-mail: info@orbis.es
http://www.orbis.es
T-11
TERMINAL COVER
A016.08.03043