Longines L441 Manual De Instrucciones página 26

28 CALIBRE L441
3. Select TABLE C
PRESS
• The tables counter hand completes one high-speed
rotation.
• Default configuration with TABLE A applied.
When push-piece is pressed, the tables counter hand
points to 120 under TABLE C.
Press to go to TABLE C
Press to go back to TABLE A
For this example under TABLE C, go back to TABLE C by
.
pressing push-piece
4. Save TABLE C selection
PRESS
• The central counter seconds hand completes one high-
speed rotation.
• The tables counter hand completes one high-speed
rotation.
• Program the round elimination time limit under TABLE C.
5. Program the elimination time limit
Using push-pieces and
• You can choose between two elimination time limits, either
120 or 180 seconds, depending on the course length.
• Press to go to 180 seconds for courses over 500 metres.
• Press to go to 120 seconds for courses under
500 metres.
Longines_MDE-L441.indb 28
All manuals and user guides at all-guides.com
6. Save the elimination time limit
• The pts/sec penalties counter hand completes one high-speed
rotation.
• Program the number of seconds added for faults committed
by the rider.
7. Program the number of seconds added per fault
Using push-pieces
• By default, 4 seconds' penalty per fault are applied on the watch.
• Each press on push-piece
counter. You can select 4, 3 or 2 added seconds for each fault
committed by the rider.
• Each press on push-piece
counter. You can select 2, 3 or 4 added seconds for each fault
committed by the rider.
8. Save final programming
• The central counter seconds hand and chronograph hundredths
of a second counter hand are positioned to 12 o'clock.
• The tables counter hand points to C.
• The pts/sec penalties counter hand points to zero.
• The watch is ready to time a jumping competition round under
TABLE C, with an elimination time limit programmed in step
No.5.
You can exit JUMPING mode programming after each setting step.
OR
8. Back to step No.3
PRESS
and
decrements the pts/sec penalties
increments the pts/sec penalties
2 SECONDS
2 SECONDS
Select TABLE A
Select TABLE C
PRESS
01.04.15 14:44