Wiseup V1000 Guia Del Usuario página 4

All manuals and user guides at all-guides.com
V. Setting Time/Date Stamp
5.1. Power off the camera and connect it to a proper PC computer USB port using the
included USB cable.
5.2. The camera will be recognized as a removable disk drive.
5.3. Click on the drive in the root directory and inside the root directory, open the file
named "time.txt".
5.4. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS Y (For example: 2017.04.12 14:24:32 Y). If you don't need the
time stamp on the video footage, change "Y" into "N" in the "time.txt" file. (For example:
2017.04.12 14:24:32 N). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera and connect the camera to an outlet AC power supply using the
DC5V power adapter and the USB cable provided.
6.2. The blue and red indicator lights will keep flashing alternatively during the charging process.
6.3. It will take 110 minutes to obtain a full charge.
6.4. The red indicator light will turn off while the blue one will stay illuminated when the
camera is fully charged.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, press the Power Button and Mode Button
simultaneously once; the camera will shut down automatically. Then you can restart the camera
with factory default settings.
VIII. Time Setting
8.1. Pull the Time Adjustment Knob until you hear a click. Both hour and minute hands will
be stopped.
8.2. Rotate the Time Adjustment Knob to set time.
8.3. Push the Time Adjustment Knob back after the time set is completed.