Descargar Imprimir esta página
Fluke 810S Instrucciones
Ocultar thumbs Ver también para 810S:

Publicidad

Enlaces rápidos

W 注意
電磁的に取り付けられたセンサを使用する場合は、テスト面
に取り付ける際に注意してください。磁石は非常に強力で、
センサアセンブリを引き付け、テスト面に衝撃を与える可能
性があります。過度な衝撃はセンサに損傷を与えることがあ
ります。センサをしっかり押さえながら、注意深くテスト面
に装着し、衝撃を最小限に抑えるようにします。
2
1
Instruction Sheet
W Caution
When using a magnetically mounted Sensor, be careful
when attaching it to the test surface. The magnet is
very strong and could pull the Sensor assembly from
your hand and impact the test surface. An excessive
impact can damage the Sensor. Hold the Sensor firmly
and carefully roll the Sensor onto the test surface to
minimize the potential for impact.
PN 3566474
March 2010
© 2010 Fluke Corporation. Product specifications are subject to change without notice.
Printed in USA. All rights reserved.
810S Sensor
3

Publicidad

loading

Resumen de contenidos para Fluke 810S

  • Página 1 Sensor. Hold the Sensor firmly and carefully roll the Sensor onto the test surface to minimize the potential for impact. PN 3566474 March 2010 © 2010 Fluke Corporation. Product specifications are subject to change without notice. Printed in USA. All rights reserved.
  • Página 2 Mode d’emploi Folha de instruções W Attention W Atenção En cas d’utilisation du capteur à montage magnétique, Ao usar um sensor montado magneticamente, tome prenez garde à sa fixation sur la surface de test. cuidado ao acoplá-lo à superfície de teste. O ímã é L’aimant est très fort et pourrait vous arracher muito forte e pode arrancar o conjunto do Sensor da l’ensemble capteur de la main pour lui faire heurter la...