DJI ZENMUSE X4S Guia De Inicio Rapido página 4

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of this product.
Users shall observe safe and lawful practices including, but not limited to, those set forth
in the document.
Zenmuse X4S
The Zenmuse X4S gimbal and camera features a 1-inch CMOS sensor, supporting 4K/60
video recording and up to 20MP still photo capture. As with other DJI 3-axis gimbal
systems and 24mm (35mm equivalent) lens, the Zenmuse X4S can be mounted onto a
DJI aircraft* and can stream live HD video wirelessly to the DJI GO
1
2
3
4
5
Installation
1. Remove the Gimbal Cap.
1. DJI Gimbal Connector 2.0
2. Pan Motor
3. Tilt Motor
4. Lens
5. Camera
6
6. Roll Motor
* Supported on the Inspire 2. Visit
official DJI website for more
information.
1 1
4 app.
TM
3