Water Resistance - Rodania ronda CAL. 5020.B Manual De Instrucciones

water resistance

the most important reason of non-functioning of the watch is the effect of water or humidity. therefore we advise to regularly
have a look at your watch to see if all parts necessary to keep the water out are still in good working condition: crown,
pushers, crystal. when damage or defects in one of these parts is detected, avoid all contact with water. you will find the
degree of water resistance engraved in the case back. this degree does not mean literally that you can submerge your watch
up to this depth. it indicates a standard fabrication norm, that guarantees that your watch has been tested to withstand an
atmospheric pressure, proving that all elements and gaskets are well in place and efficient. the water resistance will last in
time, depending on the use of the watch.
if any part, necessary to keep water and humidity out of your watch is deficient, missing or broken the mechanism of your
watch might be affected, disturbed or blocked. we advise a water resistance test every year, best before the bathing season.
never use the pushers of a chronograph while being under water !
important: after each operation, you must always push the crown back down to ensure that your watch remains water-
resistant.
Remark
Return your quartz watch at the end of its service life to the available recycling systems.
All manuals and user guides at all-guides.com
www.rodania.com l 9