Rodania ronda CAL. 5020.B Manual De Instrucciones página 61

ronDa Cal. 5020.B (continue)
adjustinG the chronoGraph hands to zero position
push-button a
centre stop-second
hour
counter
minute
counter
All manuals and user guides at all-guides.com
push-button a
push-button B
example: one or several chronograph hands are not in
their correct zero positions and have to be adjusted
(e.g. following a battery change).
pull out the crown to position iii.
(all 3 chronograph hands are in their correct
or incorrect zero position.)
press push-buttons a and B depressed
simultaneously for at least 2 seconds.
(the centre stop-second rotates by 360°
corrective mode is activated.)
adjusting the centre stop-second
a 1 x short
single step:
continuous: a long
adjusting the next hand B
adjusting the minute counter hand and the
hour counter hand (mechanical coupled)
a 1 x short
single step:
continuous: a long
returning the crown to position i.
termination of the chronograph hands
adjustment (can be carried out at any time).
www.rodania.com l 61