If the power cable is damaged,
it must be changed by the ma-
nufacturer,
its
DESCRIPTION
1. Control panel
2. Front panel
3. Oscillating flaps
4. air outlet
5. Water level window
6. Swivel wheels
7. handle
8. Filter grid
9. Lock button
10. water tank
ASSEMBLING THE WHEELS
turn the air cooler
upside down on a
flat surface after ca-
refully preparing the
surface by covering
it with a blanket, or
other protection, so as not to scratch the
top of the unit.
Take the 4 swivel wheels and insert them
in the appropriate slots. Caution: the
wheels with brakes must be positioned
Rev 0-21 11 19
maintenance
Fabriqué en Chine
service or a similarly qualified
person to avoid any danger.
at the front of the unit. The wheels wit-
hout brakes must be positioned at the
rear of the unit.
Make sure that the wheel axles are cor-
rectly positioned in their slots and tigh-
ten them with an open-ended spanner.
Put the unit on its wheels and place it on
a flat and stable surface.
Page 20