As can be seen in the Example, this scene can be
operated with a device such as a detector, magnetic
contact, Geofence, scene selector, APP / WEB or
rules ... By activating the example scene, it will turn
off the plugs, lights, adjust the temperature at 22ºC, it
SUMMARY: Activation of the scene = Activate the list of devices involved
7.2. Add a scene from (HomePortalServer)
7.2.1. To create new Scenes from the WEB:
https://smarthomesec.bydemes.com/ByDemes/
7.2.2 Enter the panel with username and password
and select: Automation [1] –> Scene [2] -> Add scene
[3]
7.3. Scene Parameters (HomePortalServer).
Maximum of 10 Scenes can be created and each with
a maximum of 5 diff erent actions.
28
HSGW series alarm central
will turn off the TV and fi nally it will change the panel
to ARMED mode. Therefore, with just one scene
action we control the status of all the desired devices
and adjust them to the desired needs.
7.4. Add a scene from APP (SmartHomeSec). Maxi-
mum of 10 Scenes can be created and each with a
maximum of 5 diff erent actions.
To create new Scenes from the APP:
7.4.1. Enter the panel with username and password
and select: Automation [1] –> Scene [2] -> Add scene
[3]
7.4.2. Scene Parameters (see directions).
Figure 7.2.2
1- Assign a name to the Scene
2- Select an Icon "Optional"
3- Add/ Delete Action.
4- Confi guration of the action to be
carried out:
In the photo Ex.:
Action 1: Turn off device light
Action 2: Arm partition 1
To save the confi guration select
Submit.
Figure 7.3