Report Settings: Report Url; Report Settings: Report Events - Climax VESTA HSGW Serie Manual Instalador

16. Report Settings: Report URL

This is used for the installer to program the repor-
ting destinations.
16.1. Manitou protocol via IP
Format: ip: // (Subscriber Number) @ (server IP) :(
Port) / MAN
Example: ip: //1234@54.183.182.247: 8080 / MAN
16.2. Climax CID protocol via IP
Format: ip: // (Subscriber Number) @ (server IP) :(
Port) / CID
Example: ip: //1234@54.183.182.247: 8080 / CID
16.3. SIA DC-09 protocol via IP
Format: ip: // (Subscriber Number) @ (server IP) :(
Port) / SIA
Example: ip: //1234@54.183.182.247: 8080 / SIA
16.4. SIA DC-09 protocol using CID event code via IP
Format: ip: // (Subscriber Number) @ (server IP) :(

17. Report Settings: Report Events

Within the Report Page, you can confi gure
the data of your receiver or event receiver.
See the following pages for the permitted
reporting format and group priority.
Figure 15.2
Port) / CID_SIA
Example: ip: //1234@54.183.182.247: 8080 / CID_SIA
16.5. CSV protocol via IP
Format: ip // (Subscriber Number) @ (server IP) :(
Port) / CSV
Example: ip: //1234@54.183.182.247: 8080 / CSV
16.6. SMS via GSM
Format: sms: // telephone / CID or sms: // telephone
/ TEXT
Example: SMS: // 1234 @ 0987654321
16.7. VOIP
Format: report via sip server: sip: username or sip:
username @ server report via lan: sip: ip address
Example: sip: john / sip: join@59.124.123.22 sip:
192.196.0.10 sip:192.196.0.10
Select a Report condition:
All Events: The system will report all
events to this destination.
Alarm events: The system will only report
alarm events to this destination.
Status events: The system will only report
status events (non-alarm events) to this
destination.
Figure 17
HSGW series alarm central
35