System LED Indicators
There are four indicators in total. Each camera unit has an LED
indicator that faces outside (to let others know you have cameras
active). The front camera has an LED indicator which faces inside
and an on-screen indicator (both for your reference). The outward
LED indicators on both cameras can be switched off if you want the
dash camera system to be less visible to people outside. Go to Setup
> Detect Led > select Off > press OK.
Outward LED
Status Indicators
Solid Green
Flashing Green
Note:
In Motion Detection mode, only the inward LED indicator will
be on in standby. Once motion is detected, all indicators will operate
the same as normal recording.
Control Buttons
Button
Recording Mode
Enter Emergency
Recording mode
View playlist (short press)
Turn on/off Audio
Recording (long press)
Open Setup menu
(short press)
Take a snapshot
(long press)
Toggle screen view
and turn off the screen
Reset
Short press to restart the device (this won't affect saved files)
Button
Inward LED
Status Indicator
Solid Green
Flashing Green
Playlist &
Setup Menu
Return to
previous menu
Move up
- 04 -
Screen
Indicator
Off
Flashing Red
Move down
Enter/Confirm
Meaning
On; not recording
On; recording
Playback Mode
Return to
playlist / Stop
Delete/Rewind
Lock & Unlock /
Fast-forward
Play/Pause