Initial Start-Up - ratiotec TowerBank Instrucciones De Uso

[EN]

Initial start-up

Connect the power adapter (included in delivery) to the charging station
and plug the power cord into a mains socket. Initially the blue LED will
light up. Fully charge the powerbank before first use. To do so, place the
powerbank on the charging station so that the powerbank's contact pin
is touching the charging station's contact pin. When the contact pins are
touching, the powerbank's LEDs will light up.
To charge your smartphone use original accessories only. Using the charg-
ing cable, connect the powerbank with your smartphone and press the
"START" button to start the charging process. Look at the battery gauge on
your smartphone to check if the powerbank is charging your smartphone.
Once your smartphone is fully charged, remove the charging cable.
Please note: Do not connect your smartphone to the powerbank while the
powerbank is on the charging station.
10