Initial Start-Up - ratiotec TowerBank Manual De Uso

[EN]

Initial start-up

Connect the power adapter (included in delivery) to the charging station
and plug the power cord into a mains socket. Initially the blue LED will
light up. Fully charge the power bank before first use. To do so, place the
power bank on the charging station so that the power bank's contact pin
is touching the charging station's contact pin. When the contact pins are
touching, the power bank's LEDs will light up.
To charge your smartphone, use original accessories only. Using the
charging cable, connect the power bank to your smartphone and press the
"START" button to start the charging process. Look at the battery gauge on
your smartphone to check if the power bank is charging your smartphone.
Once your smartphone is fully charged, remove the charging cable.
Please note: Do not connect your smartphone to the power bank while the
power bank is on the charging station.
10