Intellinet Network Solutions 503273 Guía De Instalación Rápida página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
Powerline AV Ethernet Adapter • Quick Install Guide
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Ethernet Adapter, Model 506571 (3-port) or 503273; or Powerline AV500 Ethernet
Adapter, Model 506557. Starter Kits — Models 503280 (AV200) and 506564 (AV500) —
feature two 1-port units, the minimum required to operate the devices.
This quick install guide presents basic installation steps. For operation details and
specifications, refer to the user manual on the included Setup CD or at www.intellinet-
network.com.
CONNECTIONS
1. Connect one end of the included Ethernet
cable to the Ethernet port on the bottom of
the adapter.
2. Plug the adapter into an AC power outlet.
CAUTION: Do not plug the adapter into a power
strip or wall outlet that uses surge protection,
as this may prevent the adapter from working properly.
3. Connect the other end of the Ethernet cable to an Ethernet port on your modem or
router.
4. Repeat Steps 1-3 for a computer, a network-enabled gaming console, a digital
media device, etc. Use additional cables (not included) for Model 506571.
5. Confirm that the LEDs on the front panel are lit, as explained below.
INDICATORS AND BUTTONS
PWR LED: Lights to indicate the unit is receiving electrical
power.
PL LED: The Powerline (PL) LED indicates the overall network speed.
• Red = weak signal; slow network speed below 50 Mbps
• Orange = normal signal; standard network speed of 50-100 Mbps
• Green = excellent signal; optimal network speed above 100 Mbps
• Off = No activity/connection
ETH LED: Lights green to indicate the corresponding 10/100Mbps port (3 ports and
LEDs on Model 506571) is linked; blinks to indicate the port is transmitting or
receiving; remains off when inactive.
Reset: Press (recessed in case) when the device is plugged in to clear all data and
restore settings to factory default values. (See the user manual for details.)
Security: Press as directed in the Network Setup instructions in the user manual.
2
ENGLISH
Powerline AV200
Reset
Security
ton*
button*
but
* Located on front of Model 506571
English
Ethernet
port

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

503280506557506564506571

Tabla de contenido