Beacon 1356914 Manual De Instrucciones Y Propietario página 8

This dual-action hand pump was designed for and is ideal to inflate
your Beacon iKayak. Simply select the correct adaptor to fit your valve,
attach the hose to the valve, and inflate.
Setting up your iKayak – Assembly and Inflation
INFLATION LOCATION
Locate an area large and flat enough to unfold the Beacon iKayak
avoiding hazards that could damage the kayak or injure you.
INFLATING KAYAK
Inflate the sides of the kayak first using the included hand pump.
1.Make sure you are using the correct adaptor and that the base of the
valve is threaded tightly into place, insert the end of the hose into top of
2-way valve and inflate manually until side chambers have taken shape
but are not firm to the touch.
2.Adjust the floor bladder to ensure it is centered inside the cover.
(This step is important and will ensure the floor is in the proper position
after inflation)
3.Inflate the floor fully. (see instructions on next page)
4.Continue to inflate the sides of kayak until they are firm to the touch.
It's better to have more air than not enough.
7