Philips AVENT SCF291/00 Manual De Instrucciones página 4

6aaaEnglish
Getting to know the settings
Note: Before you sterilize bottles and other items, clean them first.
Only place items in the sterilizer which are suitable for sterilizing. Do not sterilize
items that are filled with liquid, e.g. a teether with cooling fluid.
• Sterilize mode is for sterilizing baby items.
Sterilize
• A sterilizing cycle takes approximately 10 minutes.
• Heating up takes approximately 4 minutes and
sterilizing takes approximately 6 minutes.
• Make sure to pour exactly 130ml/4.5oz distilled water
directly into the water reservoir of the base.
• Auto mode is for sterilizing and drying baby items in
one go.
Auto (SCF293 only)
• An auto cycle takes approximately 40 minutes.
• When you use the "Auto" mode, the appliance
starts sterilizing first and then drying will
start automatically. The sterilizing cycle takes
approximately 10 minutes, and the drying cycle takes
approximately 30 minutes.
• Make sure to pour exactly 130ml/4.5oz distilled water
directly into the water reservoir of the base.
Dry (SCF293 only)
• Dry mode is for drying baby items.
• A drying cycle takes approximately 30 minutes.
• When you dry baby items, do not add water to the
water reservoir of the base.
Things to Note
SCF293
• Don't pour water into the air outlet.
130ml
4.5oz
• Use 130ml/4.5oz distilled water.
• Disassemble all parts completely
and place them with openings
pointing down.
SCF293
• Clean the filter every 4 weeks.
Englishaaa7
• Don't immerse the base unit in water.
• Clean the items beforehand.
• Pour out the remaining water
from large basket after each use.
Every
4 weeks
• Descale the sterilizer every 4 weeks.