QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the Desk
Control app. The app will take you through
the process of installing your Desk control.
If you have an Android device:
Go to Google Play and download the Desk
Control app. The app will take you through
the process of installing your Desk control.
Add additional Bluetooth device(s)
(max 8 devices)
1. Go to your Bluetooth menu on your
mobile device and connect to DESK-
xxxxx.
2. Once Bluetooth connection is
established, the blue LED stops blinking.
Up to 8 devices can be stored by the
system. When the 9th device is paired the
system will remove the device that have
not been connected for longest time
Factory reset:
Press manoeuvre button for 10 sec. This
deletes all paired Bluetooth devices.
Follow these instructions when
adjusting table height:
1. Make sure no objects are in the way of
the table adjusting height freely.
2. In order to run the table up/down, press
the manoeuvre button up and down
respectively or use your Desk control
app.
Safety regulations
— When the table is run up/down, keep
the necessary safety distance to avoid
the risk to get squeezed between the
moving table top and fixed objects in the
surrounding area.
— When the table is run up/down the
user shall keep watch so that nobody
is injured or no object is damaged. The
table top must not bump into a fixed
object so that the table is overturned.
Always remove any office chair before
the table is run up/down.
— The table tripod must not be altered or
reconstructed in any way. In service and
repair work of the table, the electrical
cable must always be disconnected from
the wall socket.
— Modifications to the legs are absolutely
forbidden!
— The table must not be used as a hoisting
device for persons.
Maintenance and repair instructions
— After approx. 1 week of use, check that
the screws are properly tightened.
— If the table cannot be lowered or raised,
check the connections between the legs
and the wall socket and be sure your
phone/Bluethoth device is turned on and
connected through the Desk Control app.
— If any part of the electrical system is
replaced, the electrical cable must first
be disconnected from the wall socket.
Replace the electrical part and then
connect the electrical cable to the wall
socket. The table is now ready for use.
If the table still does not work, please
contact your nearest IKEA store or
customer service.
Product servicing
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
SAVE THESE INSTRUCTIONS
5