ADJUSTING THE HEIGHT OF THE HIGHCHAIR
Press the two catches found on the plastic supports on the
front legs of the chair and adjust the highchair to the
required height, you will hear the safety clicks when it has
locked into place.
CHANGING THE POSITION OF THE BACKREST
To change the reclining position of the backrest, turn the
dial in the direction indicated by the arrow and adjust the
position.
CHANGING THE POSITION OF THE FOOTREST
To change the position of the footrest, press the two side
buttons simultaneously and adjust the position of the
footrest.
FITTING THE TRAY
Insert the two lower guides of the tray into the two side
arms and slide the tray in until it locks into places. (Check it
is correctly secure).
To remove the tray, use both hands to press the lower
catches and take it off.
The tray can be used in two different positions.
FITTING THE TRAY ONTO THE BACK OF THE HIGHCHAIR
Hang the tray on the back of the highchair by slotting it
onto the 2 supports found on the back of the rear legs.
GUARANTEE INFORMATION
2º
This article is guaranteed in accordance with R.D. 1/2007 of 16th November. Keep your receipt as proof of
purchase, you need to show it at the store where you purchased the product to prove validity in the event
of any type of claim.
This guarantee does not cover any faults or breakages caused by misuse of the article or by not following
the safety and maintenance information listed in the instructions and on the care labels.
1º
1º
2º
1º
2º
2º